Tuesday 15 May 2018

PREPARING YOUR HARDWOOD FLOOR TO BE RE-SANDED

It is important to re-sand and refinish your hardwood flooring from time to time if you want to keep them looking as good as new. This job might appear easy enough, but a good deal can go wrong without doing the ideal prep job. Lack of preparation can leave your hardwood flooring with permanently damaged worse or grain - jagged floors. It's also possible to end up with flammable sanding dust lurking in the corners of your home. Because of these potential issues, it is vital to be methodical with every step of preparing your hardwood floor to be re-sanded.

PREPARATION IS KEY

To begin with, for the preparation step, clean the area of any obstructions. Including decor, furniture, curtains and some other objects that are lying around the floor or near it. It is advisable to also temporarily eliminate any doors from their hinges should they obstruct a portion of the floor. Go over the ground foot, checking for any raised nails, staples, and screws and ensure that all of them are made flush with the floor. Drive in the nails and remove any unnecessary principles and screws, if at
all possible. Keeping them elevated at the slightest runs the chance of ripping your sanding paper or damaging your sander. If there are loose planks, nail them down and make sure the nails are flush with the surface.

Closing them isn't enough. You would be amazed how much dust can escape the nooks and cranny's. Cover these gaps in heavy tape or drape larger openings with vinyl. Don't forget to also cover any electrical outlets which will be unused while you're sand. Take measures to also protect yourself by utilizing a protective dust mask, goggles, and ear plugs. In terms of windows causing the exterior, leave them open to guarantee that the dust gets out and the air circulates.


PLOT YOUR PATH

When you're done with all these jobs, it is time to plot your sanding course. Make sure to go with the grain and prevent paths which will cause you to trip on the wires of your sander or vacuum cleaner. Your gear should be readily accessible so you don't risk spreading dust all over your house when entering and exiting the room.

Applying this kind of thoroughness with your prep function makes sure your re-sanding will proceed smoothly and safely. You will not have anything to be concerned about as long as all obstructions are from the way and you adequately protect the region. Your re-sanding will likely be successful along with your hardwood floors will look good as new if you follow the suggestions above.